[Tutorial] Fix iPhone Died and Won’t Turn on While Charging

Part 1: Why My iPhone Died and Won’t Turn on While Charging

Therefore, there are many reasons why your iPhone died and won’t turn on while charging. Check out the most common causes which are listed below:

1. Battery depletion: If your iPhone's battery was completely drained, it may take some time for it to accumulate enough charge to turn on.

2. Hardware issues: There could be a problem with the charging port, battery, or other hardware components that is preventing your iPhone from turning on.

3. Software issues: A software glitch or crash can sometimes cause the iPhone to become unresponsive and fail to turn on.

Part 2: How to Fix iPhone Died and Won’t Turn on While Charging [4 Tips]

In this section, we guide you on how to fix iPhone Died and Won’t turn on while charging issues.

Let’s dive in and Find out how to fix the iPhone 12/11/XR/X/8 that died and won’t turn on while charging cause and problems.

Fix 1: Force Restarting iPhone

One of the easiest solutions is to force restart your iPhone if your iphone died and won’t turn on while charging. In addition, most of the software issues can be solved by restarting the iPhone device.

When your iPhone 12/11/XR/X/8 died and won’t turn on while charging:

• Hold your Volume Up Button and then quickly release it.
• Next, Press the Volume Down Button and then take off your finger.
• Hold the Side button, until the Apple logo appears on your iPhone screen.
• Again Press the side button and keep repeating until the Apple logo appears.

What to do If your iPhone 6 died and won’t turn on while Charging:

• Hold and press both the power and Home buttons until the Apple logo appears on your iPhone 6 screen.
• Congratulations! Your iPhone will be turned on after this process.

What to do If your iPhone 7 died and won’t turn on while charging:

Hold down the Volume and side buttons until the Apple logo appears.

Fix 2: Check Your Lightning Cable and Charger

Here are three main points you should keep in mind while checking your lightning cable and charger.

Follow this simple guide on how to fix your lightning cable and charger, so read carefully. You need to test this process in multiple steps to make sure it's working accurately. Moreover, Let’s jump into our process!  

• Start by checking carefully your USB from one end to another to verify it is not damaged. However, If you find out that it is broken or damaged then buy a new cable
• Now, it's time to test your charger head. Therefore, Connect your iPhone to other devices. You can use various alternatives, it might be your pc USB port, car charging plug, wall adaptor, or any other media
• If in case its works with any of the suitable media, then the issue is not in your cable
• Moreover, it is directly advised to directly connect your iPhone to your USB port. It is more reliable than a USB Hub.
• Finally, the Last Step is to employ either your sibling's or friend's lightning charger cable or buy a new one. If your iPhone is charged by another lightning cable then change your charger.
• However, If still, your lightning cable is not working properly, then there might be a reason that you're using a local charger. So use genuine chargers always.

Fix 3: Check the Charging Port

It happens sometimes that your charging port gets broken which can cause the iPhone died while charging and won’t turn on. So, what do you need to do? Check the charging cable from one end to another end to make sure it is broken or not.

Hence, in case you find out that your charging port is damaged, you need to replace it with the new one. I hope this solution works out so well for checking your iPhone Charging Port.

Fix 4: Charging iPhone For a Longer Time

It happens sometimes that your charging port gets broken which can cause the iPhone died while charging and won’t turn on. So, what do you need to do? Check the charging cable from one end to another end to make sure it is broken or not.

Moreover, if this procedure does not work as well, then you should look for another method.

Fix 5: Put Your iPhone into Recovery Mode

It is difficult for the users to manually get the iPhone into a recovery mode especially when the home button is not working perfectly. So, Tenorshare ReiBoot  helps you to put the iPhone into recovery mode with just one click.

Have a look at our comprehensive guide how to fix iPhone died and won't turn on while charging issue in the step-by-step process.

• If your want to put your iPhone into recovery mode, download and install ReiBoot on your PC. Run it and connect your iPhone device to your computer.

  

• Once your device is detected by the ReiBoot, press “Enter” to put the iPhone into recovery mode. 

  

• However, in less than 1 minute your iPhone device will get into a recovery mode. You'll see that the iPhone screen displays the “connect to iTunes or Computer” logo. 

  

• Your iPhone enters the recovery mode successfully.  

  

Fix 6: Contact Apple Support

If unluckily, all these methods do not even work for you. Furthermore, you may face hardware issues like bad button power, bad display, water, or overheated damage. So, contact Apple support they will assist you online or offline. What do you just need to do? Explain the issue to them and then they will help to solve your issue.

Extra Tips: One-Click Fix iPhone Died and Won’t Turn on While Charging 

Here's an additional tip to quickly fix your iPhone with just one click using the best tool - Tenorshare ReiBoot. ReiBoot not only can free to enter or exit recovery mode, its strong Standard Repair mode can fix over 150+ iOS/iPadOS/tvOS/macOS system problems without data loss, including "iPhone died and won’t turn on while charging" issue. It is compatible with all iOS versions and devices, making it a most reliable choice for iOS system repair.