then write your review
ReiBoot for Android-Best Android System Repair Tool
Fix 50+ Android issues & Free Enter/Exit Recovery Mode
Best Android Repair Tool
Fix 50+ Android issues, No Data Loss
If you are a Google Pixel user, you must be aware that it is equipped with a massive 4500mAh battery that takes less time to charge and doesn't drain out easily when you perform normal functioning. But, if you perform high-level activities such as playing games or online streaming, the battery can drain off quickly. In this post, we will walk you through the troubleshooting steps to resolve google pixel won't charge issue safely and easily.
The first thing to do is to check whether your charger and cable are working fine or not. If the cable or charger is broken or damaged, it can cause the “pixel won't charge” problem. Therefore, you must ensure the same by examining them properly.
The next check you need to perform is to check whether your phone’s charging slot is working or not. There is a possibility that your phone’s charging slot is causing this problem. Therefore, you need to check the same for corrosion, dust and debris. You can remove debris and lint using any pointed object. But, if there is corrosion, you will need to blow a blast of compressed air.
Accessories such as your mobile cover can also contribute towards the pixel won't charge issue. This happens when your mobile case or cover prevents the charger from fitting into the charging slot properly. Therefore, you can try to charge your phone after removing its cause. If it works fine, it means that the problem was due to your mobile cover/case.
The Google pixel not charging issue can occur due to a firmware crash. When this happens the phone becomes unresponsive. To fix this firmware problem you can apply the below-listed procedures:
The below steps will tell you how to force reboot your pixel device when it's not charging.
If so, press and hold the power key on your pixel device for about 10 seconds.
Another way to fix the issue “Google pixel 2 won't charge” is by charging your phone in safe mode. You can follow these steps below to charge your phone in safe mode.
And you will see “Safe mode” at the bottom of you screen which means your phone enter Safe mode successfully.
Here are steps to put your Pixel enter recovery mode to wipe cache partiton.
If your Pixel 2 won't charge due to the firmware issue then you can try Tenorshare ReiBoot for Android to enter recovery mode in just a single click.
Download and install Reiboot for Android on PC. Using USB cable to connect your device to computer.
Start USB debugging.
Go to One-Click to Enter Recovery Mode.
Enter recovery mode successfully. And you can try to reset the device in recovery modeto see the problem is fixed or not.
When all of the above-listed solutions fail to resolve the “pixel 3 not charging” issue, the last resort is to get your phone checked by the manufacturer. In case, this charging problem started without any concrete reason then there could be a manufacturing defect. So, it's better to touch base with Google and get your device checked.
Mentioned above in the post are some of the best methods to fix the Google pixel not charging issue or slow charging issue. You can try to implement these solutions to get over the concern. We hope these solutions are helpful enough to let you charge up your device flawlessly and without any complications.
then write your review
Leave a Comment
Create your review for Tenorshare articles
By Sophie Green
2025-03-28 / Fix Android
Rate now!